Medical Air Product

1. General Requirements:

• Purpose: To provide continuous digital monitoring and alerting of medical gas levels and system status in hospital environments.
• Location: To be installed in critical areas such as ICU, surgical suites, and recovery rooms.

2. Dimensions and Design:

• Dimensions:
  • Height: 275 mm
  • Width: 415 mm
  • Depth: 80 mm
• Design: Wall-mounted with a digital LED display.
• Material: High-impact, flame-retardant MS Housing.
• Finish: Smooth finish with antimicrobial Powder coating.

3. Gas Monitoring Capabilities:

• Types of Gases Monitored:
  • Oxygen (O2)
  • Nitrous Oxide (N2O)
  • Medical Air
  • Vacuum (suction)
  • Carbon Dioxide (CO2)
• Sensors: High-accuracy, long-life digital sensors specific to each gas type.

4. Alarm Specifications:

• Visual Alarms:
  • Color-coded LED indicators for each gas (Green for normal, Yellow for warning, Red for alarm).
• Audible Alarms:
  • Adjustable alarm volume with a minimum of 85 dB at 1 meter.
  • Distinct tones for different alarm conditions (low gas pressure, high gas pressure, system fault).
• Alarm Conditions:
  • High/low gas pressure.
  • Sensor failure.
  • Power failure.

5. Display:

• Type: High-resolution LED display.
• Information Displayed:
  • Real-time gas pressure levels.
  • Alarm status for each gas.
  • System status and fault indications.
• User Interface:
  • Intuitive interface with easy navigation.
  • Test & Mute display settings.

6. Electrical Specifications:

• Power Supply:
  • Input Voltage: 110-240V AC, 50/60Hz.
• Power Consumption: ≤15W
• Safety Standards: Compliant with IEC 60601-1 for medical electrical equipment.

7. Environmental Specifications:

• Operating Temperature: 0°C to 50°C
• Humidity: 0% to 95% RH, non-condensing
• Ingress Protection: IP54

8. Installation and Mounting:

• Mounting: Wall-mounted with included hardware.
• Connections: Quick-connect fittings for gas lines and secure electrical connections.
• Installation: To be installed by certified technicians.

9. Compliance and Safety:

• Certifications:
  • CE marked.
  • Compliance with ISO 13485:2016. (Medical Gas Pipeline Systems).
  • Compliance with NFPA 99 (Health Care Facilities Code).
• Safety Features:
  • Overpressure protection.
  • Short-circuit protection.
  • Surge protection.

10. Maintenance and Calibration:

• Maintenance:
  • User-friendly access for maintenance.
  •  Regular maintenance checks recommended every 6 months.
• Calibration:
  • Factory calibrated with a recommended recalibration interval of 12 months.
  • On-site calibration capability with provided software and tools.

12. Warranty:

• Standard Warranty: 1 years for all components.

13. Documentation:

• Compliance Certificates: Provided for all relevant safety and performance standards.

1. General Requirements:

• Purpose: To provide integrated medical services including electrical outlets, gas outlets, lighting, and data ports at the patient's bedside.
• Location: To be installed behind patient beds in hospital rooms.

2. Dimensions:

• Height: 1200 mm (adjustable as per room ceiling height)
• Width: 400 mm
• Depth: 150 mm

3. Material and Finish:

• Material: High-grade aluminum alloy or stainless steel.
• Finish: Powder-coated with antibacterial properties. Color options: white, light blue, or custom colors as required by hospital branding.

4. Electrical Specifications:

• Power Outlets:
  • 4 x 230V AC outlets with safety shutters.
  • 2 x UPS outlets for critical equipment.
• Switches:
  • Rocker switches for each outlet with indicator lights.
• Lighting:
  • 1 x LED reading light with adjustable arm.
  • 1 x LED night light with dimmable feature.
• Safety:
  • All electrical components should be compliant with IEC 60601-1 standards.

5. Gas Outlets:

• Oxygen Outlets: 2 x O2 outlets (compatible with standard hospital fittings).
• Vacuum Outlets: 1 x vacuum outlet.
• Medical Air Outlets: 1 x medical air outlet.
• Standards: All gas outlets must comply with ISO 7396-1 standards.

6. Data and Communication Ports:

• Data Ports: 2 x RJ45 ports for network connectivity.
• Communication: 1 x Nurse call system interface.
• Television/Entertainment: 1 x coaxial TV port.

7. Integration Features:

• Rails and Accessories:
  • Integrated rail system for mounting patient care accessories (e.g., IV poles, monitors).
• Shelves:
  • Adjustable shelves for placing small medical devices or personal items.

8. Safety and Compliance:

• Certification:
  • CE marked.
  • Compliance with IEC 60601-1 (Medical Electrical Equipment) and IEC 60601-2 (Particular requirements for the basic safety and essential performance of hospital equipment).
• Grounding:
  • All electrical outlets must be properly grounded.

9. Installation and Maintenance:

• Installation:
  • Wall-mounted with concealed fixings.
  • Installation should be performed by certified technicians.
• Maintenance:
  • Easy access panels for maintenance and repair.
  • Regular maintenance checks as per manufacturer's guidelines.

10. Customization Options:

• Color and Finish:
  • Customizable to match hospital interior decor.
• Additional Outlets:
  • Options for additional power, gas, and data outlets based on specific hospital needs.

1. General Requirements:

• Purpose: To provide integrated medical services including electrical outlets, gas outlets, lighting, and data ports at the patient's bedside.
• Location: To be installed behind patient beds in hospital rooms.

2. Dimensions:

• Height: 1200 mm (adjustable as per room ceiling height)
• Width: 400 mm
• Depth: 150 mm

3. Material and Finish:

• Material: High-grade aluminum alloy or stainless steel.
• Finish: Powder-coated with antibacterial properties. Color options: white, light blue, or custom colors as required by hospital branding.

4. Electrical Specifications:

• Power Outlets:
  • 4 x 230V AC outlets with safety shutters.
  • 2 x UPS outlets for critical equipment.
• Switches:
  • Rocker switches for each outlet with indicator lights.
• Lighting:
  • 1 x LED reading light with adjustable arm.
  • 1 x LED night light with dimmable feature.
• Safety:
  • All electrical components should be compliant with IEC 60601-1 standards.

5. Gas Outlets:

• Oxygen Outlets: 2 x O2 outlets (compatible with standard hospital fittings).
• Vacuum Outlets: 1 x vacuum outlet.
• Medical Air Outlets: 1 x medical air outlet.
• Standards: All gas outlets must comply with ISO 7396-1 standards.

6. Data and Communication Ports:

• Data Ports: 2 x RJ45 ports for network connectivity.
• Communication: 1 x Nurse call system interface.
• Television/Entertainment: 1 x coaxial TV port.

7. Integration Features:

• Rails and Accessories:
  • Integrated rail system for mounting patient care accessories (e.g., IV poles, monitors).
• Shelves:
  • Adjustable shelves for placing small medical devices or personal items.

8. Safety and Compliance:

• Certification:
  • CE marked.
  • Compliance with IEC 60601-1 (Medical Electrical Equipment) and IEC 60601-2 (Particular requirements for the basic safety and essential performance of hospital equipment).
• Grounding:
  • All electrical outlets must be properly grounded.

9. Installation and Maintenance:

• Installation:
  • Wall-mounted with concealed fixings.
  • Installation should be performed by certified technicians.
• Maintenance:
  • Easy access panels for maintenance and repair.
  • Regular maintenance checks as per manufacturer's guidelines.

10. Customization Options:

• Color and Finish:
  • Customizable to match hospital interior decor.
• Additional Outlets:
  • Options for additional power, gas, and data outlets based on specific hospital needs.

1. General Requirements:

• Purpose: To provide a secure and reliable connection point for medical gas delivery systems in hospital environments.
• Location: To be installed in patient rooms, operating rooms, ICU, emergency rooms, and other critical care areas.

2. Standards and Compliance:

• Standards:
  • BS EN 737-1 (Medical gas pipeline systems)
  • BS EN 739 (Specifications for medical gas outlets)
• Certifications: CE marked, compliant with ISO 13485:2016 and NFPA 99 standards.

3. Material and Construction:

• Body Material: High-quality, corrosion-resistant brass or stainless steel.
• Finish: Polished or chrome-plated for durability and easy cleaning.
• Seals and O-Rings: Medical-grade, non-toxic, and resistant to gas permeation.

4. Gas Types and Identification:

• Supported Gases:
  • Oxygen (O2)
  • Nitrous Oxide (N2O)
  • Medical Air
  • Vacuum (suction)
  • Carbon Dioxide (CO2)
  • Nitrogen (N2)
• Identification:
  • Color-coded as per BS 5682 and ISO 13485:2016 standards.
  • Permanent gas type labeling on each outlet.

5. Connection Types:

• Input Connection:
  • Standard BS probe connection for each gas type.
• Outlet Connection:
  • Quick-release type for secure and rapid connection/disconnection of medical gas equipment.

6. Mounting and Installation:

• Mounting Options:
  • Wall-mounted
  • Bedhead-mounted
  • Pendant-mounted
• Installation Hardware:
  • Supplied with mounting brackets, screws, and installation instructions.
• Compatibility: Designed to integrate with existing medical gas pipeline systems and architectural layouts.

7. Performance Specifications:

• Flow Capacity:
  • Minimum flow rate as per BS  standards for each gas type.
• Pressure Drop:
  • Minimal pressure drop across the outlet to ensure efficient gas delivery.
• Leakage:
  • Zero leakage under standard operating conditions.

8. Safety Features:

• Non-Interchangeability:
  • Specific connection profiles for each gas type to prevent cross-connection.
• Locking Mechanism:
  • Secure locking to prevent accidental disconnection.
• Emergency Shutoff:
  • Integrated emergency shutoff capability.

9. Maintenance and Servicing:

• Access:
  • Designed for easy access for maintenance and servicing.
• Replacement Parts:
  • Availability of replacement parts and service kits.
• Service Intervals:
  • Recommended service interval as per manufacturer’s guidelines.

10.Warranty:

• • Standard Warranty: 1 years for all components

1. General Requirements:

• Purpose: To provide continuous monitoring and alerting of medical gas levels and system status in hospital environments.
• Location: To be installed in critical areas such as ICU, surgical suites, and recovery rooms.

2. Dimensions and Design:

• Dimensions:
  • Height: 150 mm
  • Width: 250 mm
  • Depth: 50 mm
• Design: Wall-mounted with an easy-to-read analog display.
• Material: High-impact, flame-retardant MS Casing.
• Finish: Smooth finish with antimicrobial Powder coating.

3. Gas Monitoring Capabilities:

• Types of Gases Monitored:
  • Oxygen (O2)
  • Nitrous Oxide (N2O)
  • Medical Air
  • Vacuum (suction)
  • Carbon Dioxide (CO2)
• Sensors: High-accuracy, long-life sensors specific to each gas type.

4. Alarm Specifications:

• Visual Alarms:
  • Individual LED indicators for each gas (Green for normal, Yellow for warning, Red for alarm).
• Audible Alarms:
  • Adjustable alarm volume with a minimum of 85 dB at 1 meter.
• Alarm Conditions:
  • High/low gas pressure.
  • Sensor failure.
  • Power failure.

5. Display:

• Type: Analog gauges for each gas type with clear, labeled scales.
• Range:
  • Oxygen: 0-100 psi
  • Nitrous Oxide: 0-100 psi
  • Medical Air: 0-100 psi
  • Vacuum: 0-30 inHg
  • Carbon Dioxide: 0-100 psi
• Accuracy: ±2% full scale.

6. Electrical Specifications:

• Power Supply:
  • Input Voltage: 110-240V AC, 50/60Hz
  • 12V direct power supply
• Power Consumption: ≤10W
• Safety Standards: Compliant with IEC 60601-1 for medical electrical equipment.

7. Environmental Specifications:

• Operating Temperature: 0°C to 50°C
• Humidity: 0% to 95% RH, non-condensing
• Ingress Protection: IP42

8. Installation and Mounting:

• Mounting: Wall-mounted with included hardware.
• Connections: Quick-connect fittings for gas lines and secure electrical connections.
• Installation: To be installed by certified technicians.

9. Compliance and Safety:

• Certifications:
  • CE marked.
  • Compliance with ISO 13485:2016 (Medical Gas Pipeline Systems).
• Safety Features:
  • Overpressure protection.
  • Short-circuit protection.
  • Surge protection.

10. Maintenance and Calibration:

• Maintenance:
  • User-friendly access for maintenance and sensor replacement.
  • Regular maintenance checks recommended every 6 months.
• Calibration:
  • Factory calibrated with a recommended recalibration interval of 12 months.

11. Warranty:

• Standard Warranty: 1 years for all components

• Product Name: Self-Sealing Medical Gas Outlet
• Application: Delivery of medical gases in hospital settings such as patient rooms, ICU, operating theaters, and emergency rooms.
• Design: Compact, self-sealing mechanism to prevent gas leakage when not in use.

• Compliance: Conforms to relevant international standards, such as:
  • ISO 13485: 2016 (Medical Gas Pipeline Systems)
  • ISO 9001:2015
• Certification: CE marked, ISO Marked

• Body Material: High-quality, durable brass or stainless steel
• Sealing Material: Medical-grade elastomers (e.g., EPDM, Nitrile)
• Cover: ABS plastic
• Finish: Polished  for corrosion resistance

• Height: 50-60 mm
• Width: 40-50 mm
• Depth: 70-90 mm (variable based on model)

• Oxygen (O2): White color coding
• Nitrous Oxide (N2O): Blue color coding
• Medical Air: Black color coding
• Vacuum: Yellow color coding
• Carbon Dioxide (CO2): Grey color coding
• Other Gases: Configurable based on hospital needs

• Inlet: DISS (Diameter-Indexed Safety System), NIST (Non-Interchangeable Screw Thread), or BS (British Standard) connectors
• Outlet: Self-sealing connection for quick and secure attachment of gas-specific probes and flowmeters

• Flow Rate: Capable of handling flow rates as per gas type requirements (e.g., Oxygen: up to 100 L/min)
• Pressure Rating: Compatible with standard hospital pipeline pressures (e.g., 4-5 bar for Oxygen)

• Self-Sealing Mechanism: Automatically seals when the probe is removed to prevent gas leakage
• Safety Lock: Prevents accidental disconnection
• Color-Coded Identification: Easy visual identification of gas type
• Serviceability: Front access for easy maintenance and testing
• Durability: Designed for frequent connection and disconnection cycles

• Mounting: Wall-mounted or bed head unit integration
• Accessibility: Easy access for maintenance and servicing
• Orientation: Vertical or horizontal installation

• Secondary Check Valve: For added safety
• Integrated Filter: To ensure gas purity
• Custom Labels: For hospital-specific identification

• Warranty: 1-year warranty against manufacturing defects
• Support: Full technical support and service packages available

• Custom configurations and additional gas types are available upon request.
• All outlets come with comprehensive installation and maintenance instructions.

This specification ensures that the self-sealing outlets meet high standards of safety, reliability, and performance required in medical environments.

1. General Requirements:

• Purpose: To provide integrated medical services including electrical outlets, gas outlets, lighting, and data ports at the patient's bedside.
• Location: To be installed behind patient beds in hospital rooms.

2. Dimensions:

• Height: 1200 mm (adjustable as per room ceiling height)
• Width: 400 mm
• Depth: 150 mm

3. Material and Finish:

• Material: High-grade aluminum alloy or stainless steel.
• Finish: Powder-coated with antibacterial properties. Color options: white, light blue, or custom colors as required by hospital branding.

4. Electrical Specifications:

• Power Outlets:
  • 4 x 230V AC outlets with safety shutters.
  • 2 x UPS outlets for critical equipment.
• Switches:
  • Rocker switches for each outlet with indicator lights.
• Lighting:
  • 1 x LED reading light with adjustable arm.
  • 1 x LED night light with dimmable feature.
• Safety:
  • All electrical components should be compliant with IEC 60601-1 standards.

5. Gas Outlets:

• Oxygen Outlets: 2 x O2 outlets (compatible with standard hospital fittings).
• Vacuum Outlets: 1 x vacuum outlet.
• Medical Air Outlets: 1 x medical air outlet.
• Standards: All gas outlets must comply with ISO 7396-1 standards.

6. Data and Communication Ports:

• Data Ports: 2 x RJ45 ports for network connectivity.
• Communication: 1 x Nurse call system interface.
• Television/Entertainment: 1 x coaxial TV port.

7. Integration Features:

• Rails and Accessories:
  • Integrated rail system for mounting patient care accessories (e.g., IV poles, monitors).
• Shelves:
  • Adjustable shelves for placing small medical devices or personal items.

8. Safety and Compliance:

• Certification:
  • CE marked.
  • Compliance with IEC 60601-1 (Medical Electrical Equipment) and IEC 60601-2 (Particular requirements for the basic safety and essential performance of hospital equipment).
• Grounding:
  • All electrical outlets must be properly grounded.

9. Installation and Maintenance:

• Installation:
  • Wall-mounted with concealed fixings.
  • Installation should be performed by certified technicians.
• Maintenance:
  • Easy access panels for maintenance and repair.
  • Regular maintenance checks as per manufacturer's guidelines.

10. Customization Options:

• Color and Finish:
  • Customizable to match hospital interior decor.
• Additional Outlets:
  • Options for additional power, gas, and data outlets based on specific hospital needs.

Amico PB Gas Outlet Specification (As per Indian Standards)

General Specifications:

• Brand: MAP
• Product Name: Amico PB Gas Outlet
• Product Type: Medical Gas Outlet

Design and Construction:

·         Material: High-grade brass , Medical Grade copper pipe & SS is used for durability and corrosion resistance.

• Finish:  powder-coated front faceplate for aesthetics and additional protection.
• Dimensions:
  • Height: [115 mm]
  • Width: [80 mm]
  • Depth: [85 mm]
• Weight: [ 0.72 kg]

Functional Specifications:

• Gas Compatibility: Designed for specific gases (e.g., medical air, oxygen, nitrous oxide, vacuum, CO2 etc.)
• Pressure Range:
  • Operating Pressure: 4.2 to 5.6 kg/cm² (60 to 80 psi)
  • Maximum Pressure: 7 kg/cm² (100 psi)
• Flow Rate: 60 l/min
• Connection Type: Quick-connect or DISS (Diameter Index Safety System)
• Inlet Connection Size: 1/2 inch BSPT (British Standard Pipe Tapered)
• Outlet Connection Size: 1/4 inch BSPT (British Standard Pipe Tapered)

Compliance and Standards:

• Certifications:
  • ISO 9001:2015
  • ISO 13485:2016
  • CE Mark

Features:

• Safety Mechanism:
  • Anti-disconnect mechanism to prevent accidental disconnections.
  • Internal check valve to prevent backflow.
• User Interface:
  • Color-coded for easy identification (e.g., yellow for MED vacuum, Black for MED Air , white for Oxygen)
  • Ergonomic design for ease of use.
• Maintenance:
  • Serviceable without removing from the wall, Panel etc.
  • Replaceable & Repairable components for easy maintenance.

Installation:

• Mounting Options:
  • Wall mount
  • Flush mount
  • Modular panel mount
• Installation Requirements:
  • Pre-piped manifold system
  • Proper support structure
  • Adequate clearance for service access

Environmental Specifications:

• Operating Temperature Range: 0°C to 50°C
• Storage Temperature Range: -20°C to 60°C
• Humidity: 0% to 95% non-condensing

Warranty:

• Warranty Period:1 years
• Coverage: Covers defects in materials and workmanship under normal use.

Accessories and Options:

• Optional Accessories:
  • Pressure gauges
  • Flow meters
  • Wall Cover and bezels
• Customization:  options available with MAP brand & without Brand Name upon request.

1. Flowmeter Type:

   • Back Pressure Compensated (BPC) for consistent flow even under varying back pressure conditions.

2. Flow Range:

   • 0–15 LPM (Liters per Minute) with a clear flow scale for precise adjustments.
   • Optional ranges may include 0–5 LPM or 0–10 LPM, depending on clinical requirements.

3. Material:

   • Body: Chrome-plated brass for durability and corrosion resistance.
   • Control Knob: Brass with a smooth adjustment mechanism.
   • Flow Tube: Polycarbonate or borosilicate glass, resistant to high-pressure gases.

4. Connections:

   • Inlet: 1/8" or 1/4" BSP/NPT threaded connection.
   • Outlet: Designed for direct connection to humidifier bottles or oxygen tubing.

5. Accuracy:

   • ±10% of full-scale reading.

6. Pressure Rating:

   • Input pressure: 50 psi (approx. 3.5 bar).

7. Safety Features:

   • Needle valve for precise flow control.
   • Shatterproof flow tube for added safety.

8. Standards:

   • Compliant with ISO 13485 for oxygen compatibility.
   • CE-certified for medical use.

1. Capacity:

   • 150ml to 250ml (typically 250 ml).

2. Material:

   • Bottle: Polycarbonate, autoclavable, and shatterproof.
   • Lid: ABS or polyamide, resistant to high pressures and medical gases.

3. Design:

   • Bubble-type humidification for effective moisture delivery.
   • Easy-to-read water level markings.

4. Pressure Rating:

   • Designed to withstand a pressure of up to 4 bar.

5. Safety Features:

   • Built-in pressure relief valve (releases at 2–4 psi) to prevent overpressure.
   • Leak-proof, ergonomic design for safe operation.

6. Compatibility:

   • Fits securely with MAP BPC flowmeters and other standard oxygen outlets.

7. Sterilization:

   • Compatible with autoclaving or cold sterilization.

8. Standards:

   • Manufactured to ISO 13485 and CE-certified

Zonal Valve Box Specification for Hospital

1. General Requirements:

• Purpose: To provide a central control point for isolating sections of the medical gas pipeline system in case of emergencies or maintenance.
• Location: To be installed in accessible areas such as corridors, utility rooms, and near nursing stations.

2. Dimensions and Design:

• Dimensions:
  • Height: Variable based on the number of valves (typically 300 mm per valve row)
  • Width: 400 mm
  • Depth: 150 mm
• Design: Wall-mounted with a hinged door and clear front panel for easy visibility and access.
• Material: High-quality, corrosion-resistant stainless steel or powder-coated steel.
• Finish: Smooth finish with antimicrobial coating.

3. Valve Configuration:

• Number of Valves:
  • Configurable based on the specific needs (typically 1 to 6 valves per box).
• Types of Valves:
  • Ball valves or diaphragm valves compatible with medical gas systems.
• Gas Types Supported:
  • Oxygen (O2)
  • Nitrous Oxide (N2O)
  • Medical Air
  • Vacuum (suction)
  • Carbon Dioxide (CO2)
  • Other specialized medical gases as required.

4. Valve Specifications:

• Valve Material: Brass or stainless steel, compliant with ISO 7396-1 standards.
• Operation:
  • Quarter-turn operation for quick isolation.
  • Lockable handles to prevent unauthorized operation.
• Markings:
  • Clear, permanent labeling for each gas type and direction of flow.
  • Color-coded handles or labels per NFPA 99 standards.

5. Panel and Door Features:

• Front Panel:
  • Clear, shatter-resistant acrylic or polycarbonate.
  • Hinged for easy access to valves.
  • Gasketed to prevent dust and contaminants.
• Door Lock:
  • Key lock or tamper-evident seal.
• Emergency Access:
  • Breakable glass panel for emergency access.

6. Pressure Gauges:

• Location: Integrated within the valve box, visible through the front panel.
• Type: Analog pressure gauges for each gas line.
• Range:
  • Oxygen: 0-100 psi
  • Nitrous Oxide: 0-100 psi
  • Medical Air: 0-100 psi
  • Vacuum: 0-30 inHg
  • Carbon Dioxide: 0-100 psi
• Accuracy: ±2% full scale.

7. Compliance and Safety:

• Certifications:
  • CE marked.
  • Compliance with ISO 13485 (Medical Gas Pipeline Systems)..
• Safety Features:
  • Overpressure protection.
  • Clearly labeled emergency instructions.
  • Proper grounding and bonding of metallic parts.

8. Installation and Mounting:

• Mounting: Wall-mounted with included hardware.
• Connections: Standardized inlet and outlet fittings for medical gas pipelines.
• Installation: To be installed by certified technicians.

9. Maintenance and Testing:

• Access: Easy access for maintenance and valve replacement.
• Service Intervals: Annual service recommended, or as per hospital maintenance schedule.

10. Warranty:

• Standard Warranty:  1 year for all components.