Medical Air Product

Hospital Manifold Specification 1. General Description

• Manufacturer: [Specify Manufacturer]
• Model: [Specify Model]
• Compliance: The manifold system shall comply with NFPA 99, ISO 7396-1, and other relevant standards.

2. Construction

• Material: The manifold shall be constructed from high-quality, corrosion-resistant brass or stainless steel.
• Finish: Clean and polished finish for durability and ease of maintenance.
• Configuration: Dual-line configuration for primary and secondary gas supplies.

3. Manifold Design

• Number of Ports: [Specify number of ports, e.g., 2, 4, 6, 8,etc.]
• Gas Types: Suitable for Oxygen, Medical Air, Nitrous Oxide, Carbon Dioxide, and other medical gases.
• Pressure Rating: Designed for inlet pressures up to [Specify pressure, e.g., 3000 psi (200 bar)].

4. Non-Return Valves (NRV)

• Type: High-quality non-return valves to prevent backflow.
• Material: Brass or stainless steel construction.
• Pressure Rating: Rated for operating pressures of up to [Specify pressure, e.g., 3000 psi (200 bar)].
• Position: Integrated into the manifold at each inlet port.

5. Tailpipes

• Material: Copper or flexible stainless steel.
• Size: [Specify size, e.g., 1/2 inch, 1/4 inch, 3/4 etc.]
• Length: [Specify length, e.g., 24 inches, 36 inches, etc.]
• Connection Type: Swivel nuts or compression fittings for secure and leak-free connections.
• Certification: Tailpipes shall be certified for medical gas use.

8. Safety Features

• Relief Valves: Pressure relief valves set to release at safe levels to prevent overpressure.
• Isolation Valves: Manual isolation valves for maintenance and emergency shut-off.
• Tamper-Proof: All critical components shall have tamper-proof seals.

9. Installation

• Mounting: Wall-mounted or floor-mounted options available.
• Connections: All connections shall be designed for easy installation and maintenance.
• Instructions: Detailed installation and operation manual shall be provided.

10. Testing and Certification

• Leak Testing: Each manifold shall be leak tested to ensure zero leakage.
• Quality Control: Comprehensive quality control procedures to ensure reliable performance.

11. Warranty

• Warranty Period: Minimum one-year warranty against defects in materials and workmanship.
• Service and Support: Details of service and support for the manifold system.

MAP are the one the leading & finest manufacturer of the flexible taile pipe in different varient.